
Why would you want to build your DIY electric bicycle? A lot of people are considering it, and you can too! If you want to take part in this booming hobby but do not know where to start, this DIY electric bicycle guide is for you. Inside The Ultimate DIY bike Guide, there are eight chapters with more than 70 detailed illustrations and photos and then over 100 pages covering the following subjects:
Choosing An Electric Bicycle
In this first chapter, you will learn how to choose your electric bicycle’s battery. You must choose a good quality battery to avoid the risk of damage. You can go for anything from rechargeable to replaceable. You also have the choice between DC or AC adaptor to provide you with better compatibility with your bike.
Number Of Bolts The Battery Has
The next thing you need to know when choosing your DIY electric bicycle’s battery pack is the number of volts it has. The higher voltage battery packs are usually suitable for use with heavier electric bikes. There are two types of batteries used for powering e-bikes. The first one is a standard deep cycle battery, which is suited for use with electric bikes. The other kind is a deep cycle battery with a NiCad battery core and attached to the front wheel axle by a small rubberized plastic tab.
It is better to buy a ready-made e-bike as it is cheaper than building your own. These ready-made e-bikes are available in all the stores, and you can choose one according to your choice and your budget. There are ready-made bikes with their motor already installed, or you may choose to buy one that requires an external motor. Ready-made bikes have a very good warranty compared to those that require an external motor.
Tires You Want For Your E-Bikes
Next, consider the kind of tires you want your e-bikes to have. There are two types of tires commonly used for DIY electric bicycles: hard-pistoned and soft. Hard-pistoned tires have a deeper tread and therefore are best used on trails and other uneven surfaces. They are made of a special rubber called ethylene propylene diene terpolymer, or EPDS.
Make Sure The Parts Do No Need Much Maintenance
You might want to purchase a test ride kit to ensure that your bike parts do not need much maintenance. To prevent waste of money, choose the best test ride tester according to your budget. A good test ride kit will normally have everything you need to carry out a detailed inspection of your bike engine and other critical bike parts, saving you a lot of time and effort. You can also save money by doing this, as there are generally deals available when buying parts from a wholesaler instead of buying them individually.
Get The Best Guides Available
If you are going to make your DIY electric bicycle, you will need to get the best guides and e-books available. A good book on the subject is The Ultimate DIY Electric Bicycle eBook. This is written by an active electric bicycle rider who has considerable knowledge of the subject. He offers many tips and advice on the use of electric bicycles, the best way to use your electric bicycle, and even how to save money. The e-book includes a detailed list of the essential parts, their function, and their specific task. Further, the e-book includes a full list of the online stores where the books are available for sale.
Final Words
In summary, it will take a little more work than just sourcing the e-book and shopping for the parts. But it will save a lot of time and money and is a fun way to build your bike. Once you have built your DIY electric bicycle, you will surely wonder how you ever managed without one. So if you are ready to get started on your own, you should consider getting the Ultimate DIY Electric Bicycle Project Guide and starting your DIY electric bicycle project today!