Motor Bicycle Chain Tensioner – Finding One That’s Right For You


motor bicycle chain tensioner

Tensioning your bike’s chain is important to avoid sudden derailments, poor handling, and general laziness on the part of the rider. So how does a tensioner work?

Work By Applying A Small Amount Of Force

A close up of an orange

Chain tensioners work by applying a small amount of force against the sprockets in your bicycle’s chain. This tiny bit of force applies enough pressure that the chain starts to vibrate. The more chain tension the better, because this means that the harder you ride the less you exert a force on the chain. This allows for a smoother, more relaxed ride.

The tensioner itself is designed to fit a standard bicycle chain and works by applying force against the chain. However, when you add a tensioner to a 24 speed bike it can become very heavy. To reduce the weight of the tensioner, you could make some changes to your bike. Many of the tensioners on the market today are designed to fit a wide range of chain sizes and are quite lightweight. However, even if the pensioner is a little heavier than the chain it will still work fine.

The motor bicycle chain tensioner works with a bolt that attaches to the side of your chain and offers two different adjustments. First, there is a manual adjustment where you allow the chain tensioner to do its job and adjust according to the size and type of chain you have. Then there’s a remote adjustment feature that lets you tension your chain from a distance. This remote setting is a very convenient feature, but be careful not to place it too far from the handlebars so that it won’t catch or damage the chain!

There are many different makes and models of the motor bicycle chain tensioner available out there. For most people, however, the Horseshoe model is a good choice. The Horseshoe tensioner has a special ball that sits atop the sprocket and allows you to easily loosen and tighten the tensioner. This ball can also be used in other chain tensioner devices such as the automatic open-closing tensioner on a dime a dozen. The Horseshoe is especially handy for people who like to travel and don’t always have the time or ability to take apart their bike.

Another tension that is quite popular is the ratchet tensioner. These devices basically turn a handle to start tightening and loosening the chain. You use one end of the ratchet to start tightening and the other to start loosening the chain. They are very handy for when you are by yourself, traveling, or if your bike has fewer components and the chain just needs to be tightened up.

Last Words

A close up of an orange

When looking at what type of tension you need, it’s a good idea to get online and do some research. Look at the various options that are available. Make sure that you take into consideration your budget and the size of your motor bicycle chain. Once you have a few ideas, you should be able to make an informed decision. Then you can order the correct tension for your bike.

Subscribe to our monthly Newsletter
Subscribe to our monthly Newsletter